Due to its special structure, the thermal conductivity of the product can reach 3000w/(m · K) under ideal conditions, but ordinary carbon nanotubes will introduce a large number of defects in the production process, causing the bending of carbon nanotubes, the crystal structure of carbon nanotubes is damaged, and the thermal conductivity is affected. The whisker carbon nanotubes belong to linear structure, and the crystal structure of carbon nanotubes can be retained to the maximum extent, the thermal conductivity of the product can be brought into play to a greater extent and has a very broad space in the field of 5G heat dissipation.
The use of carbon nanotubes as the carrier of catalytic materials is to develop new high-efficiency electrodes and electrocatalyst carriers for fuel cells platinum catalysts are currently used in fuel cells, therefore, if the cost is too high, mass production may be considered through the use of Carbon Nanotube membrane with unique properties, which may be possible to reduce the required platinum content because the membrane is thinner and lighter than the current component, fuel cells can be smaller, but still provide the same electricity quantity, carbon nanotube photoelectric material preparation technology.
Modern technology has benefited human society countless times. KELAIWEI nano carbon material company devotes itself to the research and development of nanotechnology. Nanomaterials are new materials which are widely used in high-end manufacturing industry in modern society. Nanomaterials have great advantages in hardness, toughness, electrical conductivity, thermal conductivity, mechanical property and so on, for example, the hardness of carbon nanotubes can be 100 times harder than that of steel. KELAIWEI company has been engaged in the research and development of nanomaterials for 20 years and looks forward to your cooperation.
Henan KELAIWEI Nano Carbon Material Co., Ltd. Uses carbon nano paste as conductive and heat conducting additive, and has achieved key breakthrough in the research of applying to modern equipment manufacturing. Additives will be used in all walks of life. Unlike traditional conductive and thermal conductive additives, carbon nanometer paste has better conductive and thermal conductivity. For example, the conductivity of carbon nanotubes is more than 10% better than that of traditional carbon black products.
KELAIWEI company learned that South Korea LG Chemical invested 0.374 billion yuan to expand the production of its carbon nanotubes (CNT) factory in order to expand the production of carbon nanotubes (CNT) the annual output has increased to 1200 tons as a new generation of materials-carbon nanotubes are widely used in the field of application, such as aircraft manufacturing industry, automobile parts manufacturing, battery and semiconductor manufacturing industry, etc, preparation technology of carbon nanotube photoelectric materials.
Henan KELAIWEI Nano Carbon Material Co., Ltd. Is an expert in R & D and manufacturing of high-end nano materials and nano materials production equipment KELAIWEI guarantees that the manufactured products fully meet the industry advanced standards, we will provide you with nanomaterials conforming to national and international standards, and provide after-sales service for technicians, so that you can buy them at ease and use them comfortably. KELAIWEI is always ready to provide you with products and services, preparation technology of carbon nanotube photoelectric materials.
It is very important to realize Electrostatic spraying in the manufacturing process of automobile parts, which can reduce production procedures and improve work efficiency. However, carbon nanotubes have very light weight, good conductivity and excellent physical and chemical properties, therefore, Electrostatic spraying can be realized in polymer materials using a small amount of carbon nanotube materials. Henan KELAIWEI Nano Carbon Material Co., Ltd. is looking forward to carbon nanotube material experts coming to guide and cooperate.
Brief introduction of carbon nanotubes. Carbon nanotubes are a kind of nanomaterials, and they also have the name: Pakistan tube. Carbon nanotubes are composed of carbon atoms with hexagonal structure layer by layer, and the distance between each layer of carbon atoms is about 0.34 nanometers. It can't be seen by naked eyes, and its weight can't be felt by hands. Carbon nanotubes have very rich properties, such as conductivity, heat conduction, stable structure, acid resistance, alkali resistance and water resistance......
Henan KELAIWEI Nano Carbon Material Co., Ltd pays attention to the rapid growth of new employees, quickly integrates into the KELAIWEI family, and quickly invests into our daily work. Recently, the safety and environment department of our company has carried out production skills training and safety knowledge training for new employees in the production department and the new employees in the electrical and mechanical department. The growth and rapid development of our company need the participation of new employees, who inject new strength into our company's take-off.
