The technical center, production center, planning center, management center and other teams of the Crystal Carbon Company, Henan KELAIWEI Nano Carbon Material Co., Ltd adhere to the 6S lean management method, pay attention to rewarding production process optimization personnel, scientific research technology innovation talents, production safety personnel, etc. Our company pays attention to rewards and arouses the enthusiasm of employees through reward management so that employees can better carry out various work such as research, development, production and processing. Thanks to this, our products have been sold to more than 60 countries overseas and we have applied for more than 100 patents.
It is made up of PTC ceramic heating element and aluminum tube, the temperature is below 350℃, there is no open flame when heating, the heating efficiency can reach 70%, the anti-seismic performance is poor, and it cannot be cut at will. Whisker carbon nanotubes far infrared emission paper heating rate block can quickly reach several times of ordinary heating material. At the same time, in terms of safety, due to the use of electricity and no open fire, the safety of users can be ensured in all use environments.
The headquarter of Dengfeng of Henan KELAIWEI Nano Carbon Material Co., Ltd welcomes the research and guidance work of director Zhao and deputy director Dong of the Municipal People's Congress. All the staff of our company are encouraged by the government's on-the-spot support work of "delivering policies, services, elements and confidence". All the staff of our company are full of energy and insist on prevention and control, improve work efficiency, comprehensively promote the resumption of production, accelerate the progress of various projects, and make new contributions to the economic development of our city.
As the country comprehensively promotes the rapid development of high-end manufacturing industry, the high-end nanomaterials products produced by KELAIWEI nanomaterials company are also in short supply. In view of this, our company has invested 0.45 billion, build the project of whisker carbon nanotube powder with annual processing capacity of 300 tons. KELAIWEI Co., Ltd. has always been at the forefront of carbon nanomaterials industry and is willing to explore the domestic and overseas markets of carbon nanomaterials together with its partners.
Crystalline carbon Company, a manufacturer of far infrared electric heating room in Henan province, recently developed a new product. In order to reduce the use of thermal conductive materials so as to save space, other parts are added, far infrared paper is urgently needed to replace some materials, but the company has strict requirements on the working temperature of far infrared paper, requiring that far infrared paper still has super stability within 120 degrees, the suppliers in the provinces near the company were not suitable, so they finally chose our products (the working temperature was less than 300 degrees).
KELAIWEI company has successively established Jiangxi after-sales service center and Henan Dengfeng after-sales service center. KELAIWEI company will provide customers with expert technical personnel for technical consulting services. We will provide comprehensive product application assistance and product technical guidance to our cooperative customers. KELAIWEI company insists on delivering high quality products to customers and preventing defective products from leaving the factory, so you will hardly encounter after-sales problems of products.
Crystalline carbon company, Ba-based paper is also called carbon nanotube paper, that is to say, the production of Ba-based paper applies carbon nanotubes. Carbon nanotubes have very good mechanical and physical properties, and the strength and toughness of carbon nanotubes can be 100 times that of steel. Carbon nanotubes also have very good conductivity, strong stability and very light weight, so they are used as the manufacture of Ba-based paper. Henan KELAIWEI Nano Carbon Material Co., Ltd. Has sufficient supply of carbon nanotube paper. Welcome to cooperate.
Conductive agents are commonly used in the production and manufacture of lithium batteries, so what are the commonly used conductive agents for lithium batteries? After using the conductive agent, it is helpful to improve the battery capacity and prolong the service life of the battery. There is a large demand for lithium battery conductive agents, and there are also various conductive agents in the market. Generally, the heat conduction agents of lithium batteries are carbon black, carbon fiber and conductive graphite, which are traditionally used for a long time. In addition, a batch of new conductive agents have also appeared, such as carbon nanotubes (CNT), graphene, etc.
Form high-tech products with independent intellectual property rights, replace or even surpass imported products in terms of quality and function, and promote the domestic development of high-end conductive agents. Finally realize the transformation of scientific and technological achievements into new products, carry out comprehensive promotion and application, realize application value, promote the perfect combination and good cycle of research and development, production and market, reduce the manufacturing cost of lithium ion battery, improve the quality of lithium ion batteries so as to achieve a double harvest of enterprise benefits and social benefits.
