Carbon nanotubes are higher than steel, KELAIWEI is a high-tech enterprise of carbon nanomaterials. Since the establishment of KELAIWEI, relying on the technical accumulation of over 20 years by Professor Sun Xiaogang's expert team of Nanchang University, KELAIWEI has actively explored the nanomaterials market at home and abroad. In 2008, Professor Sun's team has successfully synthesized whisker-like carbon nanotubes, in 2013, our company has achieved an annual production capacity of 30 tons, and now we have invested 0.45 billion to build a project of 300 tons of whisker carbon nanotube powder.
Synthesis of carbon nanotubes by hydrothermal method. Put the acidic solution of sucrose (according to the ratio of 1 to 19, and mix it with h2so4-sucrose solution) into the reaction kettle, and cool it to the indoor temperature after the reaction of 180 degrees high temperature within 12 hours, after centrifugal separation, ionized water is removed, and after washing and drying, carbon nanotubes of 1 nanometer to 2 nanometer length can be obtained.
After more than 20 years of rapid development, Henan KELAIWEI Nano Carbon Material Co., Ltd. recently relies on the company's capital investment of 0.45 billion yuan to build several production lines in the 13000-square-meter Dengfeng plant area and related production technology, manufacturing equipment, technology patents and so on are researched and developed independently by our company, owning related patents our products are sold to overseas and domestic provinces, and our cooperative clients highly recognize the products of KELAIWEI company. Carbon nanotubes are better than steel.
KELAIWEI company whisker nanotube research center has received good news. Professor Sun, a technical expert from KELAIWEI company, also made a detailed introduction at the 2019 annual summit meeting on the preparation and application technology of low-dimensional carbon nanomaterials. KELAIWEI company's technology breaks through the influence brought by the unfavorable method of traditional chemical preparation of whisker carbon nanotubes, and produces whisker carbon nanotubes with higher purity and higher performance.
Unmanned aerial vehicle battery has high requirements on lithium ion battery, which needs to discharge in a short time at high magnification. Adding whisker carbon nanotubes as conductive agent on the lithium ion battery of unmanned aerial vehicle can improve the magnification performance of the battery and reduce the internal resistance, the power output is larger, the cycle performance is improved, the flight time of unmanned aerial vehicles can be longer, and the service life of batteries can be longer. At present, KELAIWEI has cooperated with Company C, the performance of the product is equivalent to that of Japan's Showa electrician.
A new energy automobile power lithium battery manufacturing company in Sichuan is looking for a batch of power whisker carbon nanotubes which are applied to power lithium battery manufacturing with extremely low metal impurity content. The supply is required to be completed in the current month. Henan KELAIWEI carbon nanotubes Material Co., Ltd. can completely meet the needs of the other side. The purity of the power whisker carbon nanotubes produced by our company is above 95%, and the outer diameter is between 30 nm and 200 nm, the aperture ranges from 1 nanometer to 5 nanometer, which can be supplied at any time and fully meet the needs of the other party.
Materials with high thermal stability, high thermal conductivity, impact resistance and high conductivity are needed to make the ultrasonic surface which can adjust the wettability, the CNT transparent conductive film made of carbon nanotubes has the above characteristics. The purity of whisker carbon nanotubes produced by Henan KELAIWEI Nano Carbon Material Co., Ltd. reaches 99.99%, and its performance is much higher than that of traditional carbon nanotubes.
